
Outdoor
Water Conservation Checklist
Lawns and Irrigation
Don't drown your lawn!
Most of the year, lawns only need one inch
of water per week. As a general rule, lawns only need watering every five
to seven days in the summer and every 10 to 14 days in the winter. A hearty
rain eliminates the need for watering for up to two weeks. Buy a rain gauge and
use it to determine how much rain your yard has received.
Watch the clock! Water lawns during the early morning or late
evening hours when
temperatures and wind speed are the lowest. This reduces water losses from
evaporation.
Water only things that grow. Don't allow sprinklers to water your street,
driveway or sidewalk. Position them so water lands on the lawn and shrubs... not the
paved areas!

Consider dripping. Install irrigation devices that are the most water efficient
for each use.
Micro
and drip irrigation and soaker hoses are examples of water efficient
irrigation methods.
Be Rain
Smart. Adjust your irrigation system as
the seasons change.
Do routine inspections. Check sprinkler systems and timing devices regularly to be sure
they operate properly.
Did you know???? Florida law and Pasco County
Ordinance now require that anyone who purchases and installs an automatic
lawn sprinkler system MUST install a rain sensor device or switch which will override the irrigation cycle of the system
when adequate rainfall has occurred. To retrofit your existing system, contact
an irrigation professional for more information.

Raise the blade! Adjust the lawn mower blade to at least three inches or to its
highest level.
A higher
cut encourages grass roots to grow deeper, shades the root system and holds
soil moisture better than a closely-clipped lawn.
Do not over fertilize your lawn. Fertilizer applications increase the
need for water. Apply fertilizers that contain slow-release, water-insoluble
forms of nitrogen.
Water-Conserving Landscaping
Plant it smart! ‘Florida-Friendly’ landscaping is a
great way to design, install and maintain both your plants and irrigation
system. More importantly, it will save time, money and water. For free
information on ‘Florida Friendly’ landscaping, contact your Water Management District or your local
Cooperative Extension Service.

Use mulch to retain moisture in the soil. Mulch also helps control weeds
that compete with landscape plants for water.
Do not use cypress mulch.
Using cypress mulch encourages destruction of cypress trees,
which are wetland trees.
Plant native and/or drought-tolerant grasses, ground covers, shrubs and
trees. Once established, they do not need water as frequently and usually will
survive a dry period without watering.
Put the right plant in the right place! Group plants together based on similar water needs into zones.
Use a rain barrel/cistern to harvest
rainwater for your houseplants, garden, or planter beds. Rain barrels like this one can be made from
50 to 55 gallon food-grade drums. Larger
containers are available and affordable too.
This example of a functioning rain barrel is located at the Dade City
Cooperative Extension Service Office.
Water-Wise Ways
Do not hose down your driveway or sidewalk. Use a broom to clean leaves and other
debris from these areas.
Use a shut-off nozzle on your hose that can be adjusted down
to a fine spray so that water flows only as needed. When finished, turn it
off at the faucet instead of at the nozzle to avoid leaks. Check hose
connectors to make sure plastic or rubber washers are in place. Washers prevent
leaks.
Do not leave sprinklers or hoses unattended. A garden hose can pour out 600
gallons or more in only a few hours. Use a kitchen timer to remind yourself
to turn sprinklers off.
Avoid purchasing recreational water toys that require a constant
stream of water.
Consider using a commercial car wash that recycles water. If you
wash your own car, park on the grass and use a hose with an automatic shut-off
nozzle.
Avoid the installation of ornamental water features (such as fountains)
unless the water is recycled.
If you have a swimming pool, consider a new water-saving pool
filter. A single back flushing with a traditional filter uses 180 to 250
gallons of water.
Back to Water Conservation page